What is the Advantage and Disadvantage of Toyota oil seal factories
What is the difference between oil seal and gasket?
What is the difference between oil seal and gasket?
Difference Between Gasket and Seal
If you want to make a selection out of gasket and seal for your project, then you might be thinking that they are almost the same products. In few ways, they might be the same as they perform similar functionality. However, there are some key differences between gasket and seal that you must understand before deciding which item is perfect for your project. Here is a detailed guide to the differences between gasket and seal that will make your decision easy:
CDI contains other products and information you need, so please check it out.
A gasket is a piece that is placed between two parts to create a perfect joint between two surfaces. Gaskets are noted to fill irregularities and they are manufactured from sheet materials such as fibreglass, neoprene, felt, cork, silicone, rubber, paper, metal, plastic polymer etc.
Find out more
A seal is a category and a gasket is one of the important types of seal. Apart from the gasket, you can find several others forms of seal such as shaft seals, mechanical seals, valve stem seals, liquid sealants, O-ring seals, rotary seals and many more.
The process of manufacturing seal involves a lot of machining and a specific size seal material. It is referred to as an engineered product and designed under special conditions. Seals are also known for showing characteristics that gaskets are failing to offer. This is the reason why a seal can provide better functionalities when compared it with gasket products.
A gasket is referred to as a static piece that can be used to close the leakage between two parts that are static and doesn’t show any relative motion. On the other hand, a seal is a dynamic piece that is used to avoid leakage between two parts that show sliding or relative motion. Another essential function of a seal cover gasket is that it doesn’t allow foreign particles like dirt or dust to enter into the joint.
In case the gasket breaks down, you need to replace the existing gasket with the new one. However, when the seal breaks down, you need to replace both seals and the bearing with the new ones. This is an application where a gasket can be quite handy when compared to a seal.
Both gasket and seal are used to avoid the movement of fluid from one direction to another because of the compressive forces. However, a gasket is a non-moving object and once it is placed in a particular position, it can’t be moved. On the other hand, oil seals can move very quickly from one location to another.
One more fundamental difference between gasket and seal is that gasket is usually made from hard plastic or asbestos material. On the other hand, seals (especially oil seals) are manufactured from the material such as synthetic rubbers.
This is a detail explanation of the difference between gasket and seal. It will definitely provide you with a helpful insight into how the mechanism of both these products works. Understanding subtle differences between both these items are essential for the successful execution of any project. Once you get to know the typical characteristics and unique functionalities of gasket and seal, you can definitely make a right choice of components for your project.
Find out more
The Difference Between a Gasket and a Seal
Common Types of Oil Seal Materials
Common Types of Oil Seal Materials
What is an oil seal?
Seals are essential to protecting the bearings of any rotating shaft assembly -They prevent contaminants such as dirt, dust and water, while also preserving the system’s lubricant.
Choosing the right oil seal
Oil seals come in many different types and materials depending on their application. Determining the material is vital to ensuring your equipment is operating at its best performance. For example, your equipment may need to run at higher temperature applications, such as an engine seal for a jet engine, you may need to choose a specific material for your oil seals to run properly. In this article, we will explore the most popular and utilized materials in the industry, as well as touch on some of the more unique options out there.
Oil seal materials
Nitrile
The first material that we are going to look at is Nitrile Buna- N 70 or NBR for short.
NBR is recommended for the majority of standard applications and is the most commonly used rubber (elastomer) material. This is because of Nitrile's compatibility with most environments as well as its relatively low cost. Generally nitrile is used for disposable non-latex gloves, footwear, automotive transmission belts, synthetic leather, hoses, o-rings, gaskets, oil seals, and more.
The temperature range of nitrile is −35° to 120 °C (−30° to 250 °F). Due to this wide range, NBR seals can be used for gas oil, silicone oil, animal/vegetable oils and fat, hydraulic liquid as well as hot and cold water. In addition, NBR is oil resistant and has an excellent abrasion resistance, so for any application that demands shock absorbers, NBR is a perfect choice to go with.
Some disadvantages of NBR are poor ozone, sunlight and weather resistance as well as limited high temperature and flame resistance. For higher temperature resistance, a much better material to use is Silicone.
Silicone
Silicone compounds or “VMQ” offers a wide range of traditional operating temperatures starting at -60°C to 200°C (-140°F to 392°F).
In addition to its excellent temperature resistance, it is also resistant to ozone, light, and weather conditions. Silicone can be typically found in the food and medical industry as well as in hydraulics and pneumatics. It is often the preferred material for o-rings, moulded parts and flat seals but is also commonly used for electric insulators due to the material’s translucency and flexibility.
Although extremely flexible, silicone does have some disadvantages. Many silicone compounds have poor tensile strength, tear resistance, and abrasion resistance. If you are looking for a material that offers a higher tensile strength, while still offering high temperature resistance, look no further than Viton®.
Viton®
Viton®, a trademarked name of The Chemours Company, is a specific brand of synthetic rubber commonly used in o-rings, oil seals, gaskets, chemical resistant gloves, and other molded products.
Due to having a higher density, Viton has the widest temperature range of -40°F to over 400°F (-40°C to over 240°C) making it a perfect choice for higher temperature applications. Viton® also has the largest range of chemical resistance, i.e., it is resistant to silicone oil and grease, mineral/vegetable oil and grease, aliphatic, aromatic, and chlorinated hydrocarbons, non-flammable hydraulic fuels as well methanol fuels, and more.
Although it does have a higher tensile strength and longer wear times than other materials, it is recommended to be used in dry-running applications sparingly or intermittently.
While Viton offers a superior temperature and chemical range than other materials, it can be more expensive than the others as well. Let’s take a look at an alternative that is easier on the wallet, Polyacrylate.
Polyacrylate is a great compromise between cost and quality. It has a high performing temperature and chemical range, but not to the extent of the range of Viton. The temperature ranges from 31°C to 148°C (-25°F to 300°F). Polyacrylate is primarily used in automotive transmissions and hoses but also found in shaft seals, gaskets and o-rings, due to offering a high resistance to hot oil and oxidation. While Polyacrylate is a great alternative to other high temperature resistant materials that are more expensive, it does have a poor water compatibility and cold flexibility. The best situation for Polyacrylate is an environment where heat and oil resistance but cost is the major issue. And while these 4 different materials cover a wide range of applications, there are even more materials out there designed for very specific niches in mind.
Summary
If you are looking for the highest temperature resistant oil seals, Perfluoelastomer can go up to 600°F. If you are more concerned for low temperature, Chloroprene can go all the way down to 40°F, which is why it is used most commonly for refrigeration. And if FDA applications or medical devices are your primary concern, Butyl , the all petroleum compound, will be your best choice. As you can see, when choosing the right material to work with, you must analyze several other key components to help choose the right one.
Hopefully after reading this article, you have a better understanding of why choosing the right materials for oil seals is so important. Remember, if you have any questions about industrial oil seals and supplies, please contact us and we would be more than happy to help.
The History and Applications of Oil Seals
Posted by on 31st May
Oil seals are often called grease, fluid, or dirt seals. These seals close spaces between stationary and moving components in mechanical equipment. Oil seals are designed to prevent the escape of lubricant. They also block contaminants from entering machinery. This is especially important in severe environments where heat and foreign objects may be frequently present. They also prevent the mixing of different mediums like lubricating oil and water.
What is an Oil Seal?
Oil seals come cataloged as metric oil seals or imperial sized oil seals. The seals can also be custom-made to match the bearings in new types of machinery. They are installed in practically every type of machine including vehicles, protecting all kinds of precision, precisely-fitted ball bearings, sleeve bearings, and roller bearings.
The oil seal gets its structural stability from an interior metal ring which serves as an inner skeleton. The outer skin is made of a more flexible material like nitrile rubber or other materials based on the physical environment of the seal. A spring on the lip of the seal supports the lip and keeps the lubricant from leaking. The lip construction is what blocks contaminants from outside.
Where loads are light, the outer skin layer can be made of silicone. It can be made of Fluroelastomer (orViton) to protect under high temperatures (more than 120 degrees Celcius). The skin can also be made of Poly Acrylate or Polytetra-FluroEthylene.
The shaft on which the oil seal is mounted has to be ground to a rough surface finish. The shaft also should be hardened to prevent grooves forming on the shaft when the pressure is exerted by the spring on the seal. The area where the seal is fitted also has to be ground to prevent grooves that tend to wear out the lip of the oil seal faster than normal.
Oil seals have a flexible lip that actually rubs against the rotating shaft or housing to prevent leakage. The spring keeps the lip in contact with the shaft. Bearing isolator oil seals are dynamic seals that incorporate a rotor or rotating member and a stator or stationary member. The rotor actually turns with the shaft. Some oil shafts are bearing isolators with a "labyrinth" construction. Others incorporate simpler O-rings.
Types of oil seals include:
single and double lip
metal cased
rubber or polymer
internal, external and axial orientation
spring loaded
A patent for an oil seal was filed by Nelson Thomas Edward on August 12, , and published a year later. There were two purposes described. The device was to provide an oil seal between a fixed housing and a rotating part. The seal is described as
made of a yieldable resilient material having flat sealing faces and comprising two ring portions connected together by an annular portion substantially v-shaped in cross-section which may yield or expand as the mounting requires.
The oil seal would seal one face against a rotating member and the other face to a stationary housing. It would prevent dirt from coming between the hub or shaft and the seal.
Old School O-Rings
Early engines used O-rings (also called packing rings or toric joints) as seals (first patented in ). These are just mechanical gaskets in the shape of a torus (a circular ring--like a lifesaver), seated in a groove and compressed during assembly between two or more parts. It creates a seal at the interface. However, O-rings require a fluid film to lubricate them. They have limited usefulness in vacuum application and at extremes of temperature. The modern oil seal represents a significant improvement over the simple O-ring because it effectively seals in lubrication and prevents contamination from outside under a wide range of pressures and temperatures.
If you're looking for quality oil seals, bearings for industry or agriculture, ATV parts, and plenty more, check out The Big Bearing Store. With low prices and same day shipping in most cases, there's no reason to spend time searching the internet when everything you need is all in one place.
Guide to oil seals for your application
The Ultimate Guide to Oil Seals
Oil seals are found in a wide range of applications, in virtually every industrial sector. It is essential to select the correct oil seal so that the application in which it is used can run efficiently, free of leaks or other issues. In this blog, we explain which factors you should pay attention to when selecting the best oil seal for your application.
Oil seal specifications
The group of oil seals used in dynamic applications include radial shaft seals that seal a rotating shaft around its circumference. They are also known as lip seals, but in this blog we will use the term oil seals.
Usually, these oil seals are used to seal lubricating oil or grease and contain it within the application, so that moving parts such as bearings are continually supplied with enough lubrication. However, such seals are also used for sealing other liquids, gases, and solids, such as powders or granules.
An oil seal consists of:
An outer case, a body made of metal or provided with a rubber layer
A rubber or PTFE sealing lip
A spring, the composition of which depends on the type
The lip is specially designed to ensure the oil seal works effectively with the different forces that arise during rotation. Many different designs and materials are used, so countless types of oil seals are available. These are chosen according to the application; pumps, gearboxes, wheels, and many other rotating applications where fluids need to be sealed. They are used in a variety of sectors, such as the chemical industry, manufacturing, wind turbines, automotive sector, food industry, and more. Oil seals are used in nearly all sectors.
Choosing the right oil seal
What should you take into account when selecting an oil seal? Different types of oil seals and various types of materials are available, each designed for specific uses. It is also important to select the right size of oil seal for the best results. For this reason, selecting the right oil seal requires adequate understanding of the application in which it will be used.
Oil seal type or shape
Most standard oil seals have to comply with the DIN and ISO standards. Different standard types of oil seals are available that comply with these requirements.
The most common oil seals are the ERIKS types R, RST, M and MST, which correspond respectively to types A, AS, B and BS according to DIN /ISO .
DIN
Standard /
ERIKS
DIN
If you are looking for more details, kindly visit Toyota oil seal factories.
A
Standard /
Rubber covered
ERIKS
R
DIN
AS
Standard /
As type A with dust lip
ERIKS
RS
DIN
B
Standard /
Metal cased design
ERIKS
M
DIN
BS
Standard /
As type B with dust lip
ERIKS
MS
DIN
C
Standard /
Double metal cased
ERIKS
GV
DIN
CS
Standard /
As type C with dust lip
ERIKS
GVST
All are fitted with a spring to preload the sealing lip. All these types are for non-pressurised or low-pressure applications up to 0.5 bar for diameters of a limited size. For diameter of 500 mm or more, the maximum pressure is 0.1 bar. For higher pressures, special types or PTFE lip seals can be used.
ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.
ERIKS type GV (type C according to DIN) is equivalent to type M, but is a heavy-duty version with a double metal casing. This can be a useful solution with larger diameters in more demanding applications. There is also a version of this type with a dust lip; the GVST (type CS according to DIN).
ERIKS type R (type A according to the DIN standard) is identical in shape to type M, but has a rubber outer case with metal reinforcement on the inside. The rubber creates a good seal in the housing, even if the housing has suffered minor damage or is not in its best condition for other reasons. The RST version has a dust lip. These types are often chosen to replace a type with a metal outer case because they are easier to install and can cope with minor damage to the groove, such as scratches.
ERIKS also supplies the types GR and GRST. These are virtually identical to the types R and RST, except in this case the metal inner ring is also completely encased in rubber. ERIKS uses FKM rubber here as standard, so these seals are ideal for use in acidic environments.
An overview of the different standard types of oil seals and their main characteristics is shown below.
In addition to these standardised types, the following special types are also available:
Rubber oil seals with a rubber fabric outer case
These are comparable to type R and RST, except the outer case does not have a metal reinforcement ring. To compensate, the outside is not made of normal rubber, but a hard, heavy-duty rubber fabric. The advantage is that these types can be made in a split version. They are almost always produced to order, and made of NBR or FKM.
PTFE Lip seals
These types are made with a metal outer case and a PTFE lip. They are suitable for a wide range of temperatures from -90 °C to +260 °C.These lip seals can also be used for higher pressures of up to 10 bar (special types up to 25 bar) and rotational speeds of up to 40-45 m/s. Certain grades of PTFE are suitable for use in pharmaceutical and food applications. One important point is that PTFE lip seals do require a shaft with a harder, smoother finish.
Cassette Seals
Cassette seals are designed to maximise grease or oil retention and protection against liquid or solid contaminants. These seals are provided with their own bushings in which dirt is kept out and oil/grease kept in by a multi-lip seal.
These cassette seals are widely used in wheel-end applications, such as the axles of agricultural machinery or off-road trucks.
Oil seal for higher pressures
The sealing lip of the RST-D is more heavy-duty, so it can cope with pressures of up to 10 bar at slightly lower rotation speeds.
Reinforced GVP design for larger diameters, with rotation speeds of up to 15 m/s and pressure of 3-4 bar
Oil seal material
Outer case
Metal
The metal used in the outer case of oil seals is usually made of carbon steel. Upon request, and depending on quantities, a different type of steel (such as stainless steel) can be used.
Rubber or rubber fabric
The quality of the rubber or rubber fabric used to make an outer case is the same as the quality of the rubber sealing lip. Fabric reinforced rubber is, as the name suggests, rubber reinforced with a fabric.
Spring
Standard springs are made of carbon steel. We use stainless-steel springs for our GR and GRST oil seals made from FKM rubber. In some rare cases, an O-ring is even used as a spring element. Standard PTFE lip seals are not fitted with springs.
Sealing lip
The sealing lip is always made of a rubber or synthetic material. For oil seals with a rubber outer case (R, RST, GR, GRST), the rubber quality of the sealing lip and the outer case are the same.
The material of the sealing lip is chosen according to the liquid to be sealed and the rotational speed. For larger shafts, an NBR sealing lip can cope with surface speeds of up to 10-12 m/s, while an FKM lip is suitable for speeds of up to 35-38 m/s.
Nitrile Butadiene Rubber (NBR, nitrile)
NBR, also known as nitrile rubber or nitrile, is the most popular material for an oil seal because of its good resistance to many oils and greases, such as mineral grease and hydraulic oil. Depending on their composition, synthetic oils and greases, such as those based on glycol, can damage NBR rubber materials. Depending on the amount of glycol, a PTFE lip seal may be the best choice. NBR is also unable to cope with contact with acids and solvents. The rubber is suitable for oil and grease at temperatures from -35 °C to 100 °C.
Most ERIKS oil seals, such as the types M, MST, R and RST, are made of NBR as standard.
Fluorine rubber (FKM, Viton™)
FKM or FPM, which is in well-known brand Viton™, can withstand higher liquid temperatures of up to 180 ˚C. FKM is highly resistant to strong acids and bases, as well as to synthetic oils and greases. Glycol-based oil and grease, however, can also damage FKM.
Because of the higher temperature resistance of FKM, this material is also chosen for applications where higher speeds play a role, which raise the temperature at the sealing lip considerably. Usually, using FKM will result in a longer life than using NBR. This compensates the higher price of FKM compared to NBR, as an FKM does not have to be replaced as frequently. The low temperature resistance of standard FKM is limited to -15 ˚C.
Polytetrafluoroethylene (PTFE, Teflon®)
PTFE, which is used in the well-known brand Teflon®, is less commonly used, but it is the preferred material for specific rotating seals in the chemical, food and pharmaceutical industries. This material is notable for having a very low frictional resistance and the best chemical resistance. It can also withstand a very wide range of temperatures in these types of seals; -80 ˚C to 200 ˚C. The shafts on which oil seals with PTFE lips are used require a harder and finer finish. Something like an axle sleeve can also be used to meet this requirement.
EPDM
EPDM oil seals are less common. They are used in solvent, hot water and steam applications, EPDM resists low temperatures down to -50 °C and UV radiation well. Some types of EPDM are also suitable for higher temperatures up to +150 °C. EPDM oil seals are usually available upon request.
VMQ (silicone)
VMQ, also known as silicone, is also used for oil seals, but this is less common because the mechanical strength of VMQ is low and this material has poor wear-resistance This makes it less suitable for dynamic applications, but it can withstand fairly low and high temperatures from -60 °C to 200 °C. Many types of VMQ are also suitable for contact with pharmaceutical and food products, so VMQ is an option worth considering. VMQ oil seals are usually available on request.
Rubber type
Material Code ISO
Heat resistance
Rubber type
Nitrile
High wear resistance good running properties for general use
Material Code ISO
NBR
Heat resistance
-35 °C to + 100 °C
Rubber type
Polyacrylate
Better heat, oil and chemical resistance than NBR
It is recommended for use in oil which contains load bearing additives such as EP gear oils
Material Code ISO
ACM
Heat resistance
-20 °C to + 130 °C
Rubber type
Viton®
High level of chemical resistance
High temperature resistance
Material Code ISO
FPM
Heat resistance
-15 °C to + 180 °C
Rubber type
Silicone
Wide temperature range
Commonly used in low temperature applications
Very prone to mechanical damage during fitting
Material Code ISO
MVQ
Heat resistance
-50 °C to + 150 °C
Rubber type
Polytetrafluoroethylene
Chemical resistant
Low coefficient of friction poor elastic properties not wear resistant if used by dynamic applications
Material Code ISO
PTFE
Heat resistance
-80 °C to + 200 °C
Rubber type
Leather
Recommended for abrasive applications
Good running properties, due to the impregnated seal lip
Can be used on shafts which have a surface roughness outside the range for rubber seals
Not suitable for water
Material Code ISO
-
Heat resistance
-40 °C to + 90 °C
Oil seal size
Oil seals are available in an immense range of sizes, for shafts from a few millimetres to several metres. Once the shaft diameter, groove diameter (housing diameter) and groove width are known, selecting an appropriate oil seal is a simple task. An oil seal or its product description is usually associated with three dimensions, for example 6x15x4. These refer to the sizes of the hardware for which the oil seal is designed. In this example, this oil seal is suitable for: 6-mm shaft diameter x 15-mm groove diameter x 4-mm minimum groove width.
Oil seal installation
Have you found the right oil seal for your application? The next step is fitting the oil seal correctly, so that it remains undamaged.
Preparation
Before fitting the oil seal, it is essential to check that the oil seal, shaft and bore are clean and undamaged. The surfaces the oil seal will come into contact with must be free of sharp points or burrs. The sealing lip is fragile, so even minimal damage can cause a leak. It is also important that the shaft and bore are correctly finished.
Prepare the shaft and prevent damage
To install an oil seal properly, the shaft must be undamaged. This is so the oil seal can do its job properly on the one hand, and to prevent it from being damaged during fitting on the other. In addition, it is very important to lubricate the shaft, the sealing lip and the bore with plenty of grease. This will allow the oil seal to slide more easily over the shaft and prevent dry running after the first rotation. The oil seal may also come into contact with the keyway, thread or other grooves when sliding over the shaft. By taping or covering the shaft at the location of these irregularities with oil-soaked paper, the oil seal can be mounted without damage to the sealing lip.
Other important factors are ensuring the hardness and roughness of the shaft are correct. A shaft hardness of HRC 45 is recommended for a rubber sealing lip, with a roughness of Ra 0.4-0.8. A higher shaft hardness of HRC 60 and shaft roughness of Ra 0.1-0.4 is recommended for a PTFE lip.
Fitting an oil seal
Always start by making sure the oil seal is facing the right direction. The oil seal must be positioned with its spring to the side of the medium to be sealed. The oil seal must then be pressed into the bore. It must fit tightly (H8 in the groove is recommended). Use appropriate tools for this, such as an impact socket set, to ensure that the force is applied evenly during pressing. The oil seal must never be hammered into the bore with brute force, but eased in.
See here for more information and useful fitting tips.
Author
Stijn de Cnop
Product Manager of Sealing & Polymer Technology
Product Manager of Sealing & Polymer Technology
The company is the world’s best Mitsubishi oil seal suppliers supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.