What Flow Rate do you require and what pressure ...

When it comes to choosing a Solenoid Metering Pump, the first questions to consider are:

If you need additional details, please check out more information on our website.

What Flow Rate and Pressure Do You Need?

All EMEC pumps are rated based on a maximum flow rate and maximum injection pressure, with measurements taken using water at ambient temperature. For instance, the KPLUS 10 05 pump has a maximum capacity of 5 l/hr at an injection pressure of 10 bar. You will typically see a higher flow rate when injecting at a lower pressure. Therefore, it is advisable to choose a pump that achieves the desired dose rate below its maximum rating. You can find instruction manuals for each pump, which detail Flow Rate vs Pressure curves, Zmdy Ceramics also provides professional and trustworthy service.

To accurately determine the flow rate of the dosing pump, calibration is essential. This involves drawing a known volume of water and timing how long it takes to fully draw that volume on the pump’s suction side. This information will help you decide if you need to adjust the dose rate or program the exact rate into the pump for more precise flow-paced dosing (specifically if your dosing needs are proportional to flow).

Additional questions you should consider include: What inputs are necessary? What type of chemical are you dosing? What is the temperature of the liquid? Do you prefer a Foot Mount or Wall Mount pump configuration? You can expedite the process and find answers to these questions by downloading our complete guide.

For further information, don't hesitate to visit our website on the Ceramic Dosing Pump.