Power Inlet Box Buyer's Guide - Electric Generators Direct

A generator inlet box, also known as a power inlet box, is like an electrical outlet for your house. It'll allow you to connect your portable generator with the manual transfer switch in your basement quickly and easily.

If you are looking for more details, kindly visit our website.

Shop Generator Inlet Boxes

What is a Power Inlet Box?

A power inlet box is used when you need to connect a portable generator to a manual transfer switch located in your basement. Although you can run power cords through a basement window, this is not always ideal, depending on the window's location. Instead, your electrician can install a generator inlet box on the side of your house and hardwire it to your transfer switch. Remember, your generator must remain outside and away from windows to avoid carbon monoxide from leaking into your home.

Put another way, when connecting a manual transfer switch to a portable generator, the generator inlet box serves as the link, or gateway, that allows power to flow into your essential circuit and power your house. The diagram below visually depicts where a power inlet box falls in a typical manual transfer switch basement application.

Installing a Generator Power Inlet Box

Your electrician installs the power inlet box on the side of your house near your main electrical panel. Inside, it is hardwired to your manual transfer switch, which restores power to your main electrical panel.

When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box. It's as simple as plugging in outdoor holiday lights.

When to Install a Power Inlet Box

Before your electrician starts drilling a hole on the side of your house, make sure you truly need a power inlet box.

If your main electrical panel is installed in your garage, you don't need one. You simply need at least a 25-foot power cord and a manual transfer switch with an outlet. Then, connect the generator directly into the transfer switch through the garage. Just make sure that your generator is far enough away from the house to avoid inhaling any fumes.

The same goes for your basement. If you have a nearby window, and it's convenient, you can drop the power cord through the window and connect it directly to the transfer switch.

If you decide to install a power inlet box after all, you have a couple of options. First, make sure the inlet box amperage matches that of the power cord and transfer switch. Second, get one that can be painted because you'll want it to blend in with the exterior of the house.

Connect Your Power

A generator inlet box is a convenient connection point when you can't run a power cord directly to the transfer switch. If you have questions about choosing a power inlet box, please call us at 800-800-.

The City Power Dual Automatic Transfer Switch allows you to seamlessly integrate your primary power source with a backup power supply. Easy to install, it offers the advantage of automated operation and provides a safer switching method between your main power source and an alternate power source. This article aims to help you understand the City Power Dual Automatic Transfer Switch in greater detail, from its features and installation to its applications and benefits.

What is a City Power Dual Automatic Transfer Switch?

An Automatic Transfer Switch (ATS) is a smart device that automatically switches your electrical load between two power sources—typically a primary source (like the grid) and a backup source (like a generator or solar system). The City Power Dual ATS takes this a step further with its dual power functionality, ensuring seamless transitions and reliable performance.

Key Functions:

• Automatically switches to backup power when the primary source fails.

• Switches back to the primary source once it’s restored.

• Protects your equipment from power interruptions and potential damage.

Key Features of the City Power Dual ATS

1. Flame-Retardant Plastic Material:

   • Made from high-quality, flame-retardant plastic, this ATS ensures excellent insulation, high temperature resistance, and long-lasting durability.

2. Multiple Protection Functions:

   • Equipped with advanced protection features like short circuit, overload, phase loss, and under-voltage protection, it safeguards your electrical systems from damage.

3. Compact and User-Friendly Design:

   • Small in size, easy to install, and simple to operate, making it ideal for both residential and commercial use.

4. Automatic and Manual Modes:

   • In Automatic Mode, the switch seamlessly transitions between power sources.

   • In Manual Mode, you can control the switch direction yourself, offering flexibility in operation.

5. Compliance with International Standards:

   • Conforms to IEC-6-1 and GB/T.11, ensuring high safety and reliability.

Installation Guide

Installing the City Power Dual ATS is straightforward, but it’s essential to follow these steps for optimal performance:

AOKEYER contains other products and information you need, so please check it out.

1. Choose the Right Location:

   • Mount the switch in a well-ventilated area, away from flammable materials and at a safe height.

2. Connect the Wires:

   • Connect the primary power source (grid), backup power source (generator or solar system), and load circuits to the designated terminals on the ATS.

3. Set the Mode:

   • Use the button to select Automatic Mode for hands-free operation or Manual Mode for manual control.

4. Test the System:

   • Simulate a power failure to ensure the switch transitions smoothly to the backup source and returns to the primary source when power is restored.

Note: If you’re unsure about any step, consult a professional electrician to ensure safe and correct installation.

Types of ATS and Their Applications

The City Power Dual ATS is versatile and can be used in various settings:

1. Residential Homes:

   • Perfect for homes with backup generators or solar systems, ensuring uninterrupted power during outages.

2. Commercial Buildings:

   • Ideal for offices, retail stores, and small businesses that require continuous power for operations.

3. Industrial Facilities:

   • Suitable for factories and manufacturing plants where power interruptions can lead to significant losses.

4. Healthcare Facilities:

   • Critical for hospitals and clinics where power continuity is a matter of life and death.

5. Data Centers:

   • Ensures servers and IT infrastructure remain operational during power failures.

Why Choose the City Power Dual ATS?

• Reliability: Ensures continuous power supply without manual intervention.

• Safety: Flame-retardant material and multiple protection features make it safe for all environments.

• Ease of Use: Compact design and simple operation make it accessible for both professionals and homeowners.

• Compliance: Meets international standards, guaranteeing quality and performance.

Conclusion

The City Power Dual Automatic Transfer Switch is more than just a backup power solution—it’s a smart, reliable, and safety-focused device designed to keep your life and business running smoothly. Whether you’re at home, in the office, or managing a large facility, this ATS ensures you’re never left in the dark.

Ready to upgrade your power system? Explore the City Power Dual ATS today and experience the peace of mind that comes with uninterrupted power supply!

Call to Action

Have questions or need assistance? Contact us now to learn more about the City Power Dual ATS and how it can meet your specific needs. Don’t let power outages disrupt your life—invest in reliability today!

If you are looking for more details, kindly visit Dual Power Supply Box.