Introduction to Oil Seals and How They Are Used
Introduction to Oil Seals and How They Are Used
There are a wide variety of industrial applications and therefore there are a wide variety of oil seals to meet the specific application needs. By choosing the right oil seal you will have a better fit, improved stability, and enhanced reliability. Rubber tends to be one of the most commonly used oil seal materials. SKF, an oil seal manufacturer, explains how oil seals for and the importance of proper installation, “To provide effective sealing, radial shaft seals must be installed properly. An experienced installer with suitable tools, working in a clean environment, is recommended to provide proper installation. The shaft counterface surface and housing bore should meet the demands specified in the sections Shaft requirements and Housing bore requirements. To facilitate seal installation and to achieve initial lubrication, prior to installation, SKF recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.
TNB contains other products and information you need, so please check it out.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features, other than SKF WAVE lip designs. SKF also recommends using a hydraulic press, with suitable tools, to install a seal in its housing bore. Pressure should be applied as close as possible to the outside diameter of the seal.” Oil seals are commonly used in a variety of industries. Below are 5 types of oil seals used in today’s manufacturing and machinery industry.
If you are looking for more details, kindly visit Oil Seal Manufacturer.