How to choose the cable type and cross section of the right - knoweasy

See what type of wire and cable, bare wire, insulated wire, heat-resistant wires, shielded wires, power cables, control cables, etc. Commonly used as PVC insulated wire, PVC insulated flexible wire. Wire and cable overload caused by fires are not uncommon, this also is diversity. Such as short circuit, overload, leakage, poor contactand and other factors.

Shenxing Cable contains other products and information you need, so please check it out.

Usually only have a layer of insulation layer of wire is called “wire”,have insulation layer and sheath layer of wire is called “cable”.

Common cable model: BV, BLV, BVR, RV, RVV, RVVP, RVS, and so on.

How to choose the cable type

Family is decorated in wiring or BVR can choose BV, BV line is hard, but its overload capacity and climate resistance is better than a BVR. Than BV BVR line is applied to soft hand ability T more convenient, more expensive price.

Because BV wire is single strand and BVR with the same cross-sectional area, its copper wire is thicker, and it is not easy to burn off when the temperature is high for a long time. BVR wire copper wire is relatively thin, high temperature is easy to burn one or two of them. As long as one or two copper wires in the wire are burned, the burnt cross-sectional area is reduced, the resistance is greater, and the wire is more likely to be burned.

In practice, because BVR line is soft, easy to loose a long joint; And BV line is relatively better, so in order to prevent loose connection in the home to take "hung tin" process.

VV cable and YJV cable are generally used in power distribution in factories. W cable can only be used in room temperature environment, while YJV can be used in workshop with higher temperature, and the highest heat resistance temperature can reach 90 degrees.

Control cable RVV cable, if have a strong magnetic field, electric field around the need to choose cable RVVP with a shield. Fire protection system generally choose twisted-pair RVS, twisted pair we also call it the "normal"

Wire and cable with materials division of copper core BV series and aluminum conductor BIV series, a common area ranging from 1.5 mm to 120 mm.

According to the load calculation rated current choose wire and cable section. Appliances used in the family, for example, there are also the perceptual load impedance load, thus calculate the rated current is P = UI and P = UICosΦ

For more rvv cableinformation, please contact us. We will provide professional answers.

Assuming house electric appliance total power for 10 kw, then calculate the maximum current 1 for 56 years, it is well known that home appliances at the same time also can not work, so give a coefficient of 0.6 to 0.8 at the same time, so the coefficient of 0.8, calculate the 45 a, so the family of the total power cord can use 6 mm square copper BV series wire and cable.

Working environment temperature of the actual use process, wire and cable, wire and cable laying methods, threading pipe threading to teach is to choose a wire and cable section.

The best automatic wire stripper

Author: EVCOME-EV Chargers Manufacturers

Literally speaking, RVV wire and cable and RVVP wire and cable refer to unshielded sheathed power cords, and RVVP refers to shielded sheathed power cords. P stands for shielding, that is, RVVP has one more shielding layer (aluminum foil + shielding net) than RVV, and the main effect is anti-interference (external signal interference). 1. Different definitions. The full name of RVV cable is copper core PVC insulated PVC sheathed soft cable, also known as light PVC insulated poly, commonly known as soft sheathed wire, which is a kind of sheathed wire. RVV wire and cable are two or more RV wires and a layer of sheath. RVV wire and cable is the most commonly used cable in the weak current system. The number of core wires is uncertain, and there is a PVC sheath on the outside. There is no special requirement between the core wires. The letter R stands for flexible wire, the letter V stands for insulated polyvinyl chloride (PVC), RVVP stands for copper core PVC insulated PVC sheathed shielded flexible cable, R stands for flexible wire; VPP insulation; VPP sheath; P shielding. RVVP is a cable with flexible conductor PVC insulated wire, shielding layer and PVC sheath. Copper core PVC insulated shielding PVC sheathed flexible cable, also known as electrical connection anti-interference flexible cable. Rated voltage 300/300V. 2. Different uses. RVV wires and cables are mainly used for power lines, control lines, and signal transmission lines for electrical appliances, instruments, electronic equipment, and automation devices, and can be used for anti-theft alarm systems, building intercom systems, and household lighting connections. RVVP is suitable for efficient and safe transmission of data cables for communication, audio, broadcasting, sound systems, anti-theft alarm systems, intelligent automation systems, automatic meter reading systems, and fire protection systems. The advantage of RVVP is to minimize external signal interference. 3. Different colors. RVV is black and white. RVVPs are black. Do you choose RVV wire and cable or RVVP wire and cable? It should be selected according to the performance of the wire and cable and the required use. .

Recommend:

Wallbox EV Charger

Wall Box DC Charger

Portable EV Charger

EV Charging Cable

EV Charger Connectors

Contact us to discuss your requirements of Copper core cross-linked polyethylene insulated power cable. Our experienced sales team can help you identify the options that best suit your needs.