Fiberglass water tank price high and low reasons

Alina (FRP)

Alina (FRP)

GRP WaterTank, FRP Grating, FRP Grating Machine, GRP Rebar, other FRP products.

Published Jun 21,

FRP water tank is often used in fire engineering water tank, it can not store high temperature water, the highest temperature is about 60 degrees, so the general FRP water tank will be used as a fire tank.So, how about the price of fiberglass water tank?Today,give you a brief introduction to the price of FRP water tank.

You will get efficient and thoughtful service from Yongchang.

一、The following parameters can be provided for the quotation of the FRP water tank:

• The length, width and height of the fiberglass water tank, the combination is not the same, the number of boards is not the same, the price is not the same, and there is the thickness of the plate, the plate thickness we will according to the height of the customer's water tank to match the plate, but some customers will specify the plate thickness.
• The installation address of the glass fiber reinforced plastic water tank, need to calculate the installation fee and freight.
• Glass fiber reinforced plastic water tank flange size, water, water, sewage, overflow size and number. 
• Receiving information of FRP water tank.

We all know that the water tank according to the material can be divided into: stainless steel water tank, FRP water tank, galvanized water tank and enamel water tank and other different materials of the water tank;  

二、So we know what is the difference between fiberglass water tank and galvanized water tank? 

• Material: FRP water tank is composed of SMC molded veneer, sealing material, metal structure and piping system.  Galvanized water tank is made of Q235 steel plate, molded into a standard plate after hot dip galvanized water tank plate; 
• the price: the price of glass fiber reinforced plastic water tank and galvanized water tank overall difference is not big, but the specific price should be calculated according to the specifications of the water tank, and with the rise and fall of the raw material plate of the water tank; 
• use: FRP water tank and galvanized water tank can be applied to fire and domestic water, but FRP water tank is only suitable for room temperature water3, us, galvanized water tank is applicable to room temperature water and hot water; 

三、 The difference between stainless steel water tank and FRP water tank? 

Stainless steel water tank is made of 304 stainless steel material, the shape design is more beautiful and easy, economical and practical, long service period, not easy to damage, convenient installation, no maintenance, light weight, high compressive strength, corrosion resistance, heat resistance, clean water, anti-seepage, anti-seismic, convenient cleaning and other advantages. 

Stainless steel water tank selection of materials on water pollution capacity is low, can be corrosion resistance;It is not easy to cause secondary pollution, colorless and tasteless, and it is not easy to grow green moss and very good airtight water tank.FRP water tank is the choice of food grade resin plate pieced together, the appearance is more beautiful and generous, long service life, high compressive strength, light weight, storage is more convenient, can store the best state of water quality.FRP water tank production is in line with the national industry standards, the application of many industries, such as housing, restaurants, fire water. 

四、Food grade FRP water tank has been widely used in industrial developed countries

• It can make milk, beer, meat, aquatic products, sauce, an products and other containers and storage tanks, sugar and citric acid industry and other production equipment, granary and microwave tableware, also can make drinking water tank and water supply pipe. 
• The water tank made of glass fiber reinforced plastic has the advantages of no leakage, no deformation, no pollution, long service life, easy assembly, beautiful appearance, and can be assembled into different tonnage according to the needs of users in the water tank. 
• Used to do fiberglass water tank resin and fiberglass are used in China, to ensure the quality of products, and unique structure, with special sealing strip, bolt connection structure, convenient assembly, there will be no leakage and sealing lax phenomenon, trusted by the majority of users.

五、The unique advantages of FRP water tank: 

• The imported food grade SMC composite material plate is selected to block the sunlight irradiation and avoid algae to ensure the clean water and no pollution. 
• Light weight, easy to move and install, can reduce the building load. 
• Aging resistance, corrosion resistance, FRP products are made of glass fiber as the main material, glass fiber is a kind of composite material, generally very corrosion resistant, corrosion resistance number of years is more than 20 years. 
• Reasonable design, unique structural design combined with male and female buckle link combination, with excellent strength.  With bolt structure, sealing strip, there will be no leakage and lax sealing phenomenon.The yield strength of SMC glass is 2.5 times that of carbon steel.2 Times, professional molded ball and plate combined structure shock resistance, snow resistance, impact resistance. 
• Modular shape, volume can meet all design requirements, easy installation, can provide insulation services.  Especially for large tanks that are not easy to move and for places where the installation is inconvenient, the capacity can be selected from a very wide range of 0.125 cubic meters to cubic meters, without being restricted by the setting place. 
• Beautiful shape, smooth lines, WM design, the whole box is simply J is a work of art, pleasing to the eye. 
• In line with the basic laws and regulations of fire and construction, it can also play the role of water supply tank for H in the early stage.

Inquiry please contact.

 ✉: 

✆:+86

Web: www.chinaestop.cn

——————————————————————————

“ Wish to be your best partner in China! Welcome to visit our company ”

Follow Us:

Linkedin: https://www.linkedin.com/company/xsy-chinaestop

Facebook: https://www.facebook.com/chinaestop/       

Twitter: https://twitter.com/Chinaestop

Youtube: https://www.youtube.com/channel/UCCBJA5kWafx6dwkKHbMdoAQ/videos

Fiberglass Tanks vs. Poly Tanks

Have you ever wondered what the differences are between our fiberglass tanks and poly tanks? Price is not the only factor. Research has shown fiberglass often results in a lower overall cost due to material longevity, content flexibility, and other design factors that reduce expensive maintenance and manual interactions for proper functioning.

Here are a few reasons why fiberglass is a superior material choice for storage tanks:

Fiberglass tank fittings are bonded integrally to the tank of the same material, adding structural integrity and minimizing potential leakage.

Fiberglass tanks have the design freedom to install accessories anywhere on the tanks versus flat areas only.

Fiberglass tanks have a longer tank service life than polyethylene tanks, reducing tank replacement timeframe and minimizing the potential for catastrophic failure while increasing ROI.

Fiberglass tanks have a very low co-efficient of expansion. Polyethylene tanks can swell three to four percent, and require expansion joints in all fittings, increasing total project cost.

Fiberglass tanks can be easily supplied with side access manways for convenient access for inspection and cleaning versus top access.

Fiberglass tanks can be manufactured with an internal slope bottom, resulting in complete drainage without costly cone or dish-bottom tanks.

Fiberglass tanks can be provided with an integral pigmentation with color matching for an aesthetically pleasing, maintenance-free exterior.

Fiberglass tanks can easily be supplied with hold-down systems for wind and seismic loads.

Difference between Fiberglass and Polyethylene Water Tanks

Difference between Fiberglass and Polyethylene Water Tanks: A Comparative Study

While buying industrial storage tanks, we always like to invest in those units that are sturdy, durable, cost-effective and require low maintenance.

Fiberglass and Polyethylene are the two kinds of storage tanks that have become extremely popular for storing liquids, chemicals, and oil.

Engineered for critical applications, both of them are drastically different from each other which we are unaware of. Let’s highlight the main dissimilarities between the two.

1. Manufacturing Process

Fiberglass tanks are handcrafted units and are manufactured in a labor-intensive process. They are produced in bulk quantities through hand lay-up and filament winding processes.

On the other hand, polyethylene water tanks are manufactured using automated processes. They are engineered to perfection by roto-molding or the plastic welding process.

2. Construction

Fiberglass tanks are constructed by reinforcing high-performance glass plastics and resin materials. They are known for their corrosion-free and heat resistant properties. Hence they are a popular choice for storing industrial chemicals.

The company is the world’s best fiberglass water tank price supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Polyethylene water tanks are constructed by heating two pieces of polyethylene are joined together through pressure application.

3. Cost

Fiberglass tanks are expensive due to their complex manufacturing process. In addition to that corrosion barriers made of resin contribute to its high price significantly.

Polyethylene water tanks are less expensive because of the lower cost of raw materials and manufacturing process.

4. Maintenance

Fiberglass tanks require more maintenance because of the fact that the tanks develop corrosion over time.

If the corrosion is not dealt on time, leaks will occur resulting in the wastage of the contents. Hence careful maintenance and inspection of the industrial storage tanks are necessary from time to time.

On the other hand, polyethylene water tanks do not require much maintenance and inspection because they offer resistance to corrosion.

These tanks are also manufactured without seams and interior coatings which make them easy to maintain.

Therefore investing in polyethylene tanks will save you lots of money in the longer run! In fact, due to its durability and less maintenance, high-density cross-linked polyethylene storage vessels have become extremely popular.

Hopefully, with all the above-mentioned points, you will be able to distinguish between fiberglass and polyethylene tanks clearly. This will make your purchasing decision simple and effortless.

GSC Tanks is a leading manufacturer and supplier of premium industrial storage tanks providing customized solutions for diverse needs of the clients.

It is a one-stop destination to get quality fiberglass tanks, steel tanks, field erected tanks and other storage solutions.

Crosslinked Polyethylene Vs. Fiberglass Reinforced Plastic Tanks

Purchasing a high-performance chemical storage tank is a significant investment for your company, and choosing the right tank for your needs isn’t always an easy decision. If you’re deciding between a fiberglass reinforced plastic (FRP) tank and crosslinked polyethylene (XLPE) tank, be sure you understand the differences between them and know what to expect in terms of cost, maintenance, service, delivery times, and protection.

FRP tanks are coated with an interior chemical resin. Their structural layer is composed of chopped glass fiber or filament-wound fibers and resin. XLPE is a thermoset resin specifically engineered for critical applications like chemical storage.

Let’s explore seven important benefits of XLPE over FRP chemical tank systems. Evaluate these benefits thoughtfully as you select your next chemical storage tank system.

XLPE Offers Seamless Construction for Greater Strength

Fiberglass Reinforced Plastic tanks are filament-wound or hand laid up. Fibers are intertwined into a nexus veil that is wound onto a spool. In this spool, the fibers create a fiberglass layer with added resin, which keeps them bound together. Fiberglass tanks are constructed with seams (due to the winding).

This method of manufacturing inherently creates the opportunity for weak points that are vulnerable to leaks. In addition, FRP tank manufacturers  add the top and bottom of the tank post-production, further increasing the risk of leaks.

Conversely, crosslinked polyethylene tanks are rotationally molded, producing a one-piece construction with no vulnerable seams. As opposed to fiberglass tanks, rotationally molded tanks are a homogenous, one-layer construction. This one layer construction eliminates potential weak spots in the tank structure and eliminates wicking or delamination that can occur from chemical attack or poor construction.

Chemical Wicking into the Tank’s Walls

Because of the structure of fiberglass, harsh chemicals can wick into fiberglass tank walls over time, compromising the tank life. Eventually, the chemical resin barrier on the interior wall can be compromised, and the chemical can make its way into the structural area of the tank. This structural area usually isn’t designed to provide the chemical compatibility that the interior resin provides. As a result, the fibers can begin to break down, and eventually, the tank fails.

While there are repairs that you can sometimes make, they’re usually only temporary. Eventually you will need to replace your fiberglass tank.

That’s one of the reasons that most fiberglass tanks don’t have the same warranty Poly Processing provides for our corrosion resistant tanks. Even the harshest chemicals can’t seep into high-density crosslinked polyethylene tank walls.

Cost of Tank Ownership

Fiberglass tanks are more costly than crosslinked polyethylene tanks, sometimes three to five times more. Delivery times can be three to four times longer as well. FRP storage tanks have a higher upfront cost in general, and the lifetime cost of ownership is higher. FRP tanks require more maintenance than crosslinked polyethylene tanks, costing you time, resources and money.

Because FRP tanks are painted or have a gel coat on the outside of the tanks, they need to be recoated on occasion. This is especially true for outdoor tanks because the fiberglass requires UV protection to prevent additional wear. XLPE tanks never need to be painted or coated, because the entire wall has UV additives throughout the tank.

Special Handling Considerations

Fiberglass tanks are inflexible, which makes them vulnerable to cracking. Extreme care must be taken anytime you move an FRP tank, especially during installation. As a result, these tanks often sit on a special wicking mat so that any leaks in the bottom of the tank can be easily seen as the chemical spreads throughout the mat.

Crosslinked polyethylene tanks are much more durable, and can easily be moved at any time. In fact, our durability testing drops filled tanks from as high as 45 feet above the ground—without splitting or leak leaking.

Molded Tank Fittings vs. Traditional Attachments

All FRP fittings are added onto the tank after production, which creates the opportunity for leaks at the attachment point. Poly Processing’s IMFO® (Integrally Molded Flanged Outlet®) fitting prevents this problem because the fitting is integrally molded into the tank itself. It’s not an attachment, but a single part of the chemical tank. This innovation removes potential stress points and allows no opportunities for leaks.

NSF/ANSI 61 System Certification

Poly Processing is committed to ensuring that our polyethylene chemical storage systems meet industry standards and are NSF/ANSI 61 certified. In fact, among chemical storage tank manufacturers, Poly Processing is the only one with a complete chemical storage tank system that is NSF/ANSI-61 certified. Currently, we have NSF 61 Certification for 38 of the most popular water treatment chemicals on our XLPE tank systems. Additionally, our certifications cover XLPE tanks with the OR-® System.

Most FRP tanks hold the basic NSF/ANSI 61 certification for only one specific application, potable water.

Delivery Lead Times

We know that delivery times are critical to our customers. That's why we work diligently to ship every order within 8-12 weeks. Most FRP tank manufacturers and poly tank manufacturers are giving their customers a 24-40 week shipping window based on lack of raw material sourcing, Covid-19, etc. At Poly Processing Company, we can deliver your product in one third of that time.

Before you order an FRP tank, make sure the manufacturer gives you the price and the lead time up front. Otherwise you could be in for a rude awakening.

Trusted, consistent, and expeditious, Poly Processing’s rotationally molded crosslinked tanks are by far the toughest polyethylene tanks offered to the chemical market. With our 6-8 week delivery window, we strive to deliver peace of mind and an ease of business to each and every customer.

Learn more about FRP, XLPE and the wide range of other tank options in our tank buying guide.

Are you interested in learning more about FRP Pipes? Contact us today to secure an expert consultation!