1 ton/2 ton vertical coal/biomass boiler - Product

 LSH series vertical type biomass steam boiler is a small capacity boiler with horizontal water tubes. Flue gas is brushing the inner wall of furnace and water tubes, for radiation heat transfer and convection heat transfer, the grate and lower part of furnace is radiation heating area, the horizontal water tubes and upper part of furnace is convection heating area. It has the advantages of compact structure, small footprint, and save infrastructure cost. Sitong Boiler has a mature R&D and design team, could customize the boilers based on customers’ requirement. The vertical type boiler could burn different types biomass fuel, such as wood, waste cloth, straw, rice husk, bagasse, etc.

Partedon Group are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Technical Advantages

1. Large Heating Area

1) Horizontal pipes increase the radiation heating area, the flue gas pass through the forced convection tube bundle longitudinally, fully absorb the flue gas heat, decrease exhaust gas temperature, high thermal efficiency.

2) Low fuel consumption, compare with the older boiler, save 25%~30% energy.

2. Insulating Layer

 The boiler uses aluminium silicate board for heat preservation, low heat loss. Moreover, the shell could adopts stainless steel, the appearance is much more delicate.

3. Economizer

Economizer could be arranged at the tail of boiler to improve the thermal efficiency.

4. Compact Structure

The boiler is vertical type with small steam capacity, small footprint, easy to install, low investment. Moreover, the temperature and pressure rise-up quickly.

Why Natural Gas?

How to compare Natural Gas and Biomass Boilers

Overview

Biomass is a general term that refers to a broad range of materials that can be burnt as fuel. Products such as wood, crop waste, grasses and animal waste are classified as biomass. Biomass is often burnt on-site as a necessary process to reduce waste that otherwise must be hauled off-site. Although it is dealing with a waste stream, it may also be an important energy source. When it is an integral part of the process, biomass burning generally does not need to compete in fuel price with natural gas. If biomass is not already present on the site, or is not already being used in the process, then a careful analysis is needed to determine the economics of a new biomass-fueled system.

Biomass is typically burnt in some sort of bottom-grate, water tube boiler. The boiler produces process steam that is either used as thermal energy and/or in a steam turbine to produce electricity. Some types of waste, typically high moisture materials like manure and liquid process wastes, may be first “digested” to produce methane gas that is then burnt as a gas in boilers, engines or combustion turbines. The waste may then be dried and burnt.

The BTU content of biomass fuel varies greatly with its content and moisture percentage. Wood and wood-like high cellulose materials like crop waste, contain about 4,000 BTUs per pound when “wet”. If first dried to a moisture content of less than about 10%, the BTU content goes up to about 8,000 BTUs per pound. The combustion efficiency of biomass boilers is relatively low. Biomass boilers are sometimes co-fired with natural gas or fuel oil for either flame stabilization and/or emissions reductions.

Biomass boilers are typically rated in tons per hour or tons per day of fuel consumption, in addition to boiler horse power output or thousands of pounds of steam per hour output. In order to benefit from the ‘economy of scale’ biomass systems need to be quite large. Small systems may economically utilize a digester, but biomass combustion systems typically need to be in the range of 100,000 lbs/hour steam to be practical. Certainly they are many variables and smaller systems may be cost effective at dealing with on-site waste sources.

In addition to the cost/value of the biomass itself, material handling, on-site storage, and if transported in – transportation costs, are all significant factors in comparing the cost of biomass fuel. Conveyor motors can add hundreds of horse-power of electricity demand in large biomass systems. Large material moving equipment and man power must also be added in.

For more 1 Ton Biomass Steam Boiler(ar,de,ru)information, please contact us. We will provide professional answers.

Although biomass is never “free” it can be an economically viable and environmentally attractive option to gas, oil or coal combustion.

Example Operational and Cost Details

Typical Manual Material Handling System:

Installed Capital Costs for Solid Biomass Receiving and Preparation:

Estimated Installed Capital Costs for a Biomass-Fueled Steam Plant

Annual O&M Costs for a Biomass-Fueled Steam Plant

Summary of Biomass Combustion Boiler System Cost and Performance

Biomass Compared to Natural Gas

Advantages of Natural Gas

• no on-site fuel storage
• no material handling
• greatly reduced O&M costs
• very clean combustion
• no ash or waste stream

Advantages of Biomass

• may be readily available waste product
• considered renewable energy source
• may be considered more ‘Green’ or environmentally friendly, even if combustion emissions are higher
• may be integral part of process
• natural gas may not be available in very rural areas

Fuel-Only Cost Comparison

Example: wet wood ‘hog fuel’ with a BTU content of 4,000 BTUs/lb = 8 Million BTUs per Ton;
70% Boiler efficiency = 5.6 Million BTUs delivered per Ton wood waste

Natural Gas with about 1 Million BTUs per MCF at 80% Boiler efficiency = 0.8 Million BTUs per MCF delivered to the process.

If natural gas is $10/MCF:
5.6 / 0.8 = 7 MCF/Ton Equivalent = 7 x $10 = $70/Ton biomass equivalent

More Information

The source of the graphics and tables above is:

“Biomass Combined Heat and Power, Catalog of Technologies, U. S. Environmental Protection Agency, Combined Heat and Power Partnership” September .

The company is the world’s best 1.5 Ton Biomass Steam Boiler supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.